Mitsubishi FX2N-10GM Hardware / Programming Manual page 2

FX/E Series Positioning Controllers
Foreword
• This manual contains text, diagrams and explanations which will guide the reader in the cor-
rect installation and operation of the communication facilities of FX
For programming instructions please refer to the E-20TP OPERATION MANUAL and FX-PCS-
KIT-GM-EE SOFTWARE MANUAL.
• Before attempting to install or use the communication facilities of FX
unit this manual should be read and understood.
• If in doubt at any stage of the installation of the communication facilities of FX
FX -20GM units always consult a professional electrical engineer who is qualified and
2N
trained to the local and national standards which apply to the installation site.
• If in doubt about the operation or use of the communication facilities of FX
20GM units please consult the nearest Mitsubishi Electric distributor.
• This manual is subject to change without notice.
-10GM, FX -20GM unit.
2N 2N
-10GM, FX -20GM
2N 2N
-10GM,
2N
-10GM, FX
2N
-
2N