Continuous Pass Operation (Fx 2N -20Gm) - Mitsubishi FX2N-10GM Hardware / Programming Manual

FX Series Positioning Controllers
9.4.5 Continuous pass operation (FX
1) Outline of positioning
The machine repeats locus operation at a constant speed without stop.
2) Operating procedure
cThe machine returns to the zero point by the start command only at the first time.
dThe machine moves to the target address in a linear route.
eThe output Y0 turns on, and the machine repeats locus operation 10 times.
fThe output Y0 turns off, and the machine returns to the zero point.
3) Operation chart
-20GM)
2N
y axis
(-300,400)
E
×
(-400,300) F
0 A
×
G
(-400,-300)
H
(-300,-400)
(300,400)
D
×
(400,300)
C
Zero
point
x axis
B
(400,0)
×
J (400,-300)
I
(300,-400)
Program Examples 9
9-21