Mitsubishi FX2N-10GM Hardware / Programming Manual page 264

FX Series Positioning Controllers
Memory board
The program of FX
EEPROM-16).
The program capacity is 7.8 k steps.
The memory board with the clock function cannot be used.
Detaching of memory board
• Battery and memory cassettes to specified connectors.
Imperfect contact may cause malfunction.
• Make sure to turn off the power, then connect/disconnect a memory cassette in the
FX -20GM.
2N
If you connect/disconnect a memory cassette while the power is turned on, the data
saved the memory cassette or the memory cassette itself may be damaged.
-20GM can be made ROM by using an optional memory board (FX
2N
Maintenance 11

‚
ƒ
„
11-2
-
2NC