Mitsubishi FX2N-10GM Hardware / Programming Manual page 55

FX Series Positioning Controllers
When connecting the positioning unit to the PLC
FX-30DU-GM
24V DC 100V~240V AC
-15%
+10%
FX-30DU-GM
24V DC
-15%
+10%
*1 The name is different such as
• Perform common grounding to
• When power is separately supplied from another power supply to each of the PLC and the
FX-30DU-GM, perform common grounding to
in the positioning unit, and connect "24-" in each power supply.
At this time, connect an input common terminal in the AC type PLC, or connect "24-" in the
DC type PLC.
FX PC FX
2N 2N
(AC power supply) FX
2N
Input
COM
L N
COM
24V DC
-15% -15%
+10% +10%
FX PC
2N
FX
(DC power supply)
2N
FX
FX PC
2N
2NC
L N
24V DC 24V DC
-15% -15%
+10% +10%
,
FG
Extension block
-10GM for input (only in
-20GM
FX -20GM)
2N
Class 3
grounding
Extension block
-10GM
for input (only in
-20GM
FX -20GM)
2N
Class 3
grounding
and in each drive unit.
PE
in the positioning unit and
in the PLC,
Drive unit
*1
Drive unit
*1
in the drive unit.
in the FX-30DU-GM and
3-3
Wiring 3