Mitsubishi Q00JCPU User Manual page 97

2
PERFORMANCE SPECIFICATION
Item
Interrupt pointer [I]
Special relay [SM]
Special register [SD]
Function input [FX]
Function output [FY]
Function register [FD]
No. of device tracking words
Link direct device
Intelligent function module device
Data transfer speed
Communication mode
Transmission mode
Maximum distance
Specifications
between hub and node
of built-in
Maximum 10BASE
Ethernet
ports of CPU
-T
number of
*11
module
nodes/ 100BASE
connections -TX
Number of
*12
connections
Latch range
RUN/PAUSE contact
Timer function
Allowable instantaneous power failure
period
5VDC internal current consumption
H
External dimensions W
D
Weight
*11 : The Built-in Ethernet port QCPU is targeted.
*12 : The number indicates the total number of TCP/IP and UDP/IP protocols.
*13 : The current consumption in the Q03UDECPU is 0.46A.
*14 : The current consumption in the Q04UDEHCPU, Q06UDEHCPU, Q13UDEHCPU, and Q26UDEHCPU is 0.49A.
*15 : The values for the Built-in Ethernet port QCPU are as follows.
External dimensions(D): 115mm (4.53inch)
Weight: 0.22kg
Table2.5 Performance Specifications
Q03UDCPU Q04UDHCPU
Q02UCPU
Q03UDECPU Q04UDEHCPU Q06UDEHCPU Q13UDEHCPU Q26UDHECPU
The constant cyclic interval of system interrupt pointers I28 to 31 can be set up by parameters.
(0.5 to 1000ms, 0.5ms unit) Default values I28: 100ms, I29: 40ms, I30: 20ms, I31: 10ms
2048 points (SM0 to 2047) (The number of device points is fixed)
2048 points (SM0 to 2047) (The number of device points is fixed)
16 points (FX0 to F) (The number of device points is fixed)
16 points (FY0 to F) (The number of device points is fixed)
5 points (FD0 to 4) (The number of device points is fixed)
Device for accessing the link device directly. Dedicated to
CC-Link IE controller network and MELSECNET/H.
Specified form: J \X , J
Device for accessing the buffer memory of the intelligent function module directly.
----
----
----
----
----
----
---- 16 for MELSOFT connection and MC protocol, 1 for FTP
L0 to 8191 (8192 points by default)
(Latch range can be set up for B, F, V, T, ST, C, D, and W.) (Setting by parameters)
One contact can be set up in X0 to 1FFF for each of RUN and PAUSE. (Setting by parameters)
Year, month, date, hour, minute, second, and day-of-week (leap year automatically identified)
Accuracy: -2.96 to +3.74s (TYP.+1.42s)/d at 0
Accuracy: -3.18 to +3.74s (TYP.+1.50s)/d at 25
Accuracy: -13.20 to +2.12s (TYP.-3.54s)/d at 55
Varies depending on the power supply module.
0.23A *13
0.33A
Universal model QCPU
Q06UDHCPU
256 points (I0 to 255)
----
\Y , J \W , J \B
Specified form: U \G
100/10Mbps
Full-duplex/Half-duplex
Base band
100m (328.08feet)
Cascade connection: Four stages at maximum
Cascade connection: Two stages at maximum
0.39A
98mm (3.86inch)
27.4mm (1.08inch)
*15
89.3mm (3.52inch)
*15
0.20kg
2.5 Universal model QCPU
Q13UDHCPU Q26UDHCPU
, J \SW , J \SB
*14
2
- 19
1
2
3
4
5
6
7
8