Mitsubishi Q00JCPU User Manual page 412

6
FUNCTIONS
6
- 112 6.14 Sampling Trace Function
(c) Trace data Setting
Select "Individual setting/execution" on the Sampling trace screen.
Click the
Trace data setting
will be executed.
1) Bit Device
Maximum of 50 bit devices can be set as follows.
• X, DX, Y ,DY, M, L, F, SM, V, B, SB
• T(contact), T(coil), ST(contact), ST(coil)
• C(contact), C(coil)
• J \X, J \Y, J \B, J \SB, BL \S
2) Word Device
Maximum of 50 word devices can be set as follows.
• T(current value), ST(current value), C(current value), D
R, Z, ZR, U \G, J \W, J \SW, U3E
* 1: The extended data register (D) is also included.
* 2: The extended link register (W) is also included.
The following attributes can be set for the above devices:
• Bit device number of digits specification
• Word device bit number specification
• Index modification
Indirect specified devices cannot be set.
button and set the devices to which sampling trace
Figure 6.74 Trace data setting screen
*1
, SD, W
\G (Universal model QCPU only)
*2
, SW,