Mitsubishi Q00JCPU User Manual page 847

APPENDICES
(5) Drive information
Number Name Meaning
Memory card
Memory card typs
typs
SD600
Memory card A Memory card A
typs typs
Drive 1
SD602 (Memory card Drive 1 capacity
RAM) capacity
Drive 2
SD603 (Memory card Drive 2 capacity
ROM) capacity
*1: When the Q2MEM-8MBA is used, value stored in the special register SD603 differs depending on the combination of the serial number of the High
Performance model QCPU and the manufacture control number of the ATA card.
For details, refer to QCPU User's Manual (Hardware Design, Maintenance and Inspection).
TableApp.24 Special register
Explanation
• Indicates the type of the memory card installed.
b15 to b8 b7 to b4 b3 to
0
Drive 1
(RAM) type
Drive 2 type
• Indicates the type of memory card A installed.
b15 to b8 b7 to b4 b3 to b0
0
Drive 1
(RAM) type
Drive 2
(ROM) type
• Drive 1 capacity is stored in 1 k byte units.
• (Empty capacity after format is stored.)
• Drive 2 capacity is stored in 1 k byte units.
• (Empty capacity after format is stored.)
• Drive 2 capacity is stored in 1 k byte units.
Set by
(When Set)
b0
0: Does not exist
S (Initial and
1: SRAM card
card removal)
0: Does not exist
(1: SRAM)
2: ATA card
3: Flash card
0: Does not exist
S (Initial and
1: SRAM
card removal)
0: Does not exist
2
2: E PROM
3: Flash ROM
S (Initial and
card removal)
*1
S (Initial and
card removal)
S (Initial and
card removal)
Appendix 2 Special Register List
Corres-
ponding
Corresponding
ACPU
CPU
D9
Qn(H)
QnPH
New
QnPRH
QnU
New QnA
QnA
Qn(H)
New QnPH
QnPRH
QnU
Qn(H)
QnPH
New
QnPRH
QnU
New QnA
App
- 58
9
10
11
12