Mitsubishi Q00JCPU User Manual page 265

5
MEMORIES AND FILES USED IN CPU MODULE
(3) Additions/changes to standard ROM or Flash card files
Since all files stored in the standard ROM or Flash card are automatically deleted
when files are to be written to the standard ROM or Flash card, additions/changes to
the stored files cannot be made directly.
Use the following procedures.
(a) When [Write the program memory to ROM...] of GX Developer was used for
(b) When [Write to PLC (Flash ROM)] of GX Developer was used for writing
5.2 High Performance Model QCPU, Process CPU, Redundant CPU, Universal Model QCPU
2) Using [Write to PLC (Flash ROM)] of GX Developer
• Choose [Online]
ROM)] on GX Developer.
• The Write to PLC (Flash ROM)screen appears.
Figure 5.29 Write to PLC (Flash ROM)screen
• Select the target memory.
• Select the files to be written, and write them to the standard ROM or Flash
card.
writing
• Choose [Online] [Read from PLC] on GX Developer and read all files of the
program memory.
• Make necessary additions/changes to the read files.
• Write the modified files to the program memory.
• Choose [Online] [Write to PLC (Flash ROM)]
memory to ROM...], and write the files to the standard ROM or Flash card.
• Choose [Online] [Read from PLC] on GX Developer and read all files of the
standard ROM or Flash card.
• Make necessary additions/changes to the read files.
• Choose [Online] [Write to PLC (Flash ROM)]
ROM)], and write the modified files to the standard ROM or Flash card.
5.2.7 Writing data to standard ROM and Flash card using GX Developer
[Write to PLC (Flash ROM)] [Write to PLC (Flash
[Write the program
[Write to PLC (Flash
5
- 41
1
2
3
4
5
6
7
8