Mitsubishi Q00JCPU User Manual page 605

9
PARAMETERS
Basic
(13) Built-in Ethernet port
Note9.4
High
Performance
Note9.4
Process
Note9.4
Redundant
Note9.4
Universal
UD
Note9.4
Item Parameter No.
IP address
1016
Communication data
code
Note3
High
Basic Performance Process
Only the Built-in Ethernet port QCPU can use the parameter settings on the Built-in Ethernet port
Note9.4 Note9.4 Note9.4
tab.
Redundant Universal
UD
Note9.4 Note9.4
9.1.2 High Performance model QCPU, Process CPU, Redundant CPU, Universal model QCPU
Make settings required for using built-in Ethernet ports of the Built-in Ethernet port
QCPU.
Table9.25 Built-in Ethernet por setting list
Description
IP address :
Specify the QnUDE(H)CPU IP
address.
Subnet mask pattern:
Specify the subnet mask for
communication via routers.
H
Default router IP address:
Specify the router IP address for
communication via routers.
Select the code, Binary or ASCII,
for MC protocol communication.
Note9.4 Note3
Figure 9.24 Built-in Ethernet port
Setting range
IP address :
0.0.0.1 to 223.255.255.254
(00000001 to 0DFFFFFFE )
H H
Subnet mask pattern:
None/
192.0.0.0 to 255.255.255.252
(0C0000000 to 0FFFFFFFC )
H H
Default router IP address:
None/
0.0.0.1 to 223.255.255.254
(00000001 to 0DFFFFFFE )
H H
Binary code/ASCII code
9.1 PLC Parameters
Default value Reference
IP address :
192.168.3.39
Subnet mask
Section 7.2
pattern: None
Default router IP
address: None
Binary code Section 7.4
9
9
10
11
12
- 31