Mitsubishi Q00JCPU User Manual page 631

10
DEVICE EXPLANATION
(4) Procedure for external outputs
Outputs (Y) are used to output sequence program operation results to an external
destination.
POINT
1. Internal relays (M) should be used when a latch (memory backup) is not
required.( Section 10.2.3)
2. For latch clear, the latch clear disabled range can be set to each device in the
device setting of the PLC parameter dialog box.( Section 6.3)
10.2 Internal User Devices
10.2.4 Latch relay (L)
9
10
11
12
10
- 16