Mitsubishi Q00JCPU User Manual page 698

10
DEVICE EXPLANATION
Basic Process Redundant
Note10.23 Note10.23 Note10.23
Universal
UD
Note10.23
Note25
Basic Process Redundant
Note10.23 Note10.23 Note10.23
Universal
UD
Note10.23
10
- 83 10.7 File Register (R)
10.7.6 Precautions for using file registers
(d) Change of file register processing time depending on CPU module
Note10.23
version Note25
When the file register is specified in the serial access format (ZR
access instruction to the standard RAM on the High Performance model QCPU of
which first 5 digits of serial No. are 02092 or later, the processing time per
instruction becomes longer than that of the High Performance model QCPU of
02091 or earlier. (The increased time per instruction is 1.1 s for the Q02CPU and
0.65 s for the QnHCPU on average.)
Table10.16 indicates the processing time taken when the MOV instruction is used.
Table10.16 Change of processing time depending on file register specifying method
Instruction
02092 or later
MOV K0 R0 0.11
MOV K0 ZR0 3.55
The Basic model QCPU, Process CPU, Redundant CPU and Universal model QCPU do not
change in file register processing time depending on the CPU module version.
Q12HCPU
02091 or earlier
0.11
2.88
) for the
Q02CPU
02092 or later 02091 or earlier
0.26 0.26
7.71 6.64
Unit : s