Mitsubishi Q00JCPU User Manual page 241

5
MEMORIES AND FILES USED IN CPU MODULE
Universal
UD
Note5.1
Universal
UD
Note5.1
Note1
The Universal model QCPU cannot boot programs from the standard ROM to the program
Universal
UD
memory. (
Note5.1
5.2 High Performance Model QCPU, Process CPU, Redundant CPU, Universal Model QCPU
(a) Program memory (
A memory for storing programs required for operations in the High Performance
model QCPU, Process CPU, Redundant CPU, and Universal model QCPU.
The programs stored in the standard ROM
(read) to the program memory to perform operations. (
(b) Standard ROM (
A memory for storing data such as parameters and programs.
This memory can be specified as a storage drive of the boot source programs in
the High Performance model QCPU, Process CPU, and Redundant CPU.
(c) Standard RAM (
A memory for using file registers, local devices, and sampling trace files without
installing a memory card.
(d) Memory card ( Section 5.2.6)
A memory for the expansion use of the built-in memory in the High Performance
model QCPU, Process CPU, Redundant CPU, and Universal model QCPU.
SRAM card, Flash card, and ATA card are available.
(e) CPU shared memory (
A memory for writing/reading data between CPU modules in a multiple CPU
system.
Section 5.2.3)
Section 5.2.2)Note1
Note5.1
Section 5.2.4)
Section 5.2.5)
QCPU User's Manual (Multiple CPU System))
5.2.1 Memory configuration and storable data
and memory card are booted
Section 5.2.9)
Note5.1
1
2
3
4
5
6
7
8
5
- 17