Mitsubishi Q00JCPU User Manual page 593

9
PARAMETERS
Item Parameter No.
Computation
error
Extended
instruction
*3
error
Fuse blown
Module
compari-
son error
Intelligent
Operating
module
mode when
3002
program
there is an
execution
error
error
File access
error
Memory
card
operation
error
External
power sup-
*3
ply OFF
Carry out
battery
check
Carry out
fuse blown
check
Carry out
module
comparison
Error check 3001
Check
device
range at
*6
indexing
Diagnose
redundant
power
supply
*7
system
Constant scanning 3003
Low speed program
3006
*2
execution time
Breakdown history 3005
9.1.2 High Performance model QCPU, Process CPU, Redundant CPU, Universal model QCPU
Table9.15 PLC RAS list (Continued)
Description
Set the operation mode of the
H
CPU module at error detection.
Set whether the specified error
H
will be checked or not.
Set the constant scan time.
H
Set the execution time of a low
H
speed program every scan.
Set the storage destination of the
H
*5
CPU module failure history.
* 2: Cannot be set when the Redundant CPU and Universal model QCPU is used.
* 3: The
Extended instruction erro
* 4: For details of errors, refer to Self-diagnostics list in Section 6.17 (7).
* 5: Cannot be set when the Universal model QCPU is used.
* 6: Can be set only when the Universal model QCPU is used.
* 7: This item cannot be set when the High Performance model QCPU, Process CPU or Redundant
CPU is used. When setting this item in the Universal model QCPU, check the versions of CPU
module and GX Developer. (
Setting range
Stop/Continue
*4
Check/Do not check
0.5ms to 2000ms (0.5ms unit)
1ms to 2000ms
Store into program memory/
Store into the following history
file
r and is setting for future extension.
External power supply OFF
Appendix 4.5)
9.1 PLC Parameters
Default value Reference
Stop Section 6.17
Check Section 6.17
No setting Section 6.2
No setting Section 3.3.3
Store into program
Section 6.18
memory
9
9
10
11
12
- 19