Mitsubishi Q00JCPU User Manual page 253

5
MEMORIES AND FILES USED IN CPU MODULE
(4) Write to standard ROM
Remark
(5) How to use the program stored in the standard ROM
Universal
UD
Note5.6
Note6
Universal
The Universal model QCPU cannot boot programs from the standard ROM to the program
UD
memory. (
Note5.6
5.2 High Performance Model QCPU, Process CPU, Redundant CPU, Universal Model QCPU
The method of writing data to the standard ROM differs depending on the CPU
module.
(a) High Performance model QCPU, Process CPU or Redundant CPU
• Choose [Online] [Write to PLC (Flash ROM)]
ROM...] on GX Developer to batch-copy the program memory data to the
standard ROM. (
• Choose [Online] [Write to PLC (Flash ROM)]
GX Developer to write data to the standard ROM. (
• Use the automatic write of all data from memory card to standard ROM.
( Section 5.2.8)
(b) Universal model QCPU
• Choose [Online] [Write to PLC ] on GX Developer, and select "Standard ROM"
as the target memory to write the program memory data. (
Select "Standard ROM" as the target memory to write the program memory data.
POINT
The file size has the minimum unit. (
The occupied memory capacity may be greater than the actual file size.
Note that as the number of files rises, the difference between the occupied
memory capacity and actual file size increases.
Refer to the sections above for details of the selection, applications, procedures
and precautions for the standard ROM wiring methods.
The programs stored in the standard ROM are booted (read) to the program memory
Note5.6
to perform operations.
Note6
Section 5.2.3)
Section 5.2.7)
Section 5.4.4)
( Section 5.2.9)
5.2.4 Standard ROM
[Write the program memory to
[Write to PLC (Flash ROM)] on
Section 5.2.7)
Section 5.2.2)
5
1
2
3
4
5
6
7
8
- 29