Mitsubishi Q00JCPU User Manual page 608

9
PARAMETERS
(2) Tracking settings
Item Parameter No.
Tracking device settings
Signal flow memory
tracking setting
Device detail settings
Tracking block No.
Do auto forward
Tracking block No.1
(Auto ON SM1520)
Device range settings
File register file set-
tings
Tracking characteristics
settings
9
- 34 9.2 Redundant Parameter
Make the settings for the tracking function of the Redundant CPU.
Table9.28 Tracking settings list
Description
Set whether the range of the
tracking device data will be set
freely or not.
Set whether signal flow memory
tracking will be done or not.
Set the tracking device when the
user sets the tracking device
freely.
Select the block No. of the
tracking device.
Select the block No. and set the
D003
H
tracking device in the device
range settings.
Set whether the tracking block
No. 1 will be automatically
tracked or not.
Set the tracking device and
range.
When the file register has been
set in the device range settings,
set the target memory, file name,
etc. of the tracking file register.
Set the tracking operation when
D002
H
executing tracking.
Remark
Refer to the following manual for the precautions for the tracking function and
redundant parameter setting.
QnPRHCPU User's Manual (Redundant System)
Figure 9.26 Tracking settings
Setting range
Internal device block setting/
Device detail settings
No tracking/Do tracking
----
1 to 64
Auto tracking enabled/Auto
tracking disabled
QnPRHCPU User's Manual
(Redundant System)
Synchronized tracking mode/
Program priority mode
Default value Reference
Internal device
block setting
No tracking
----
1
QnPRHCPU User's
Manual (Redundant
System)
Auto tracking
enabled
----
----
Synchronized track-
ing mode