Mitsubishi Q00JCPU User Manual page 597

9
PARAMETERS
(7) Program
Item Parameter No.
Program 7000
9.1.2 High Performance model QCPU, Process CPU, Redundant CPU, Universal model QCPU
When writing multiple programs to the CPU module, set the file names and execution
types (execution conditions) of the programs.
Table9.19 Program list
Description
When writing multiple programs
to the CPU module, set the file
names and execution types
(execution conditions) of the
H
programs.
Also set the fixed scan interval
(execution interval of fixed scan
execution type program).
* 1: When using a Universal model QCPU, only local device can be set.
When using the file usability setting with a Universal model QCPU, check the versions of the CPU
module and GX Developer. (
* 2: Not settable when the Universal model QCPU is used.
Figure 9.18 Program
Setting range
• Program name
• Execution type (fixed scan
interval when fixed scan
No setting
execution is selected)
• File using method setting *1
• I/O refresh setting *2
Appendix 4.5)
9.1 PLC Parameters
Default value Reference
Section 3.3.6
9
- 23
9
10
11
12