Mitsubishi Q00JCPU User Manual page 788

12
PROCEDURE FOR WRITING PROGRAM TO CPU
MODULE
12
- 17 12.2 High Performance Model QCPU, Process CPU, Redundant CPU, Universal Model QCPU
12.2.4 Procedure for writing multiple programs
3)
Is the ERR.
NO
LED of the CPU
module on
(flickering)?
YES
Choose [Diagnostics]
on GX Developer or perform [PLC
Diagnostics] to check the error factor, and
remove the error factor.
NO
Is boot run
executed?
YES
End To Section 12.2.5
Figure 12.6 Flowchart for writing multiple programs
POINT
In the MELSECNET/H system where the Universal model QCPU No.1 is the
control CPU, the Universal model QCPU can communicate with the QnUCPU
where MISSING PARA. has been occurred via the MELSECNET/H. (For the
network No.1 only.)
[System Monitor]
QCPU User's Manual (Hardware Design,
Maintenance and Inspection)