Mitsubishi Q00JCPU User Manual page 292

5
MEMORIES AND FILES HANDLED BY CPU MODULE
(2) When High Performance model QCPU, Process CPU, Redundant CPU is
Table5.16 Memory capacity calculation for files (High Performance model QCPU, Process CPU, Redundant CPU)
Function
Drive heading
Parameter
Sequence program
Device comment
Device initial value
User setting area
Multi-block online
program change
File register
5
- 68 5.4 File Operation by GX Developer and Handling Precautions
5.4.3 Memory capacities of files
used
When using the program memory, standard RAM, standard ROM or memory card,
calculate the rough size of each file according to Table5.16.
64
Default (increases depending on the parameter setting)
CPU module
High Performance model QCPU
Process CPU
Redundant CPU
Reference
Boot setting 70 + (18
CC-Link IE controller network setting made
MELSECNET/H setting made
Ethernet setting made
CC-Link setting made
CC-Link setting
module 1
module 2 to module 4
module 5
module 6 to module 8
Remote password setting made
max. 164 increased
*1
136 + ((4 (number of steps) + (number of allocate memory for online change)))
74 + (sum of comment data sizes of devices)
• Comment data size of one device = 10 + 10250
• a : Quotient of ((device points)/256)
• b : Remainder of ((device points)/256)
66 + 44 n + 2 (total number of device points set for the device initial value)
• n : Number of set device initial values
Value set at formatting (0 to 15k)
Value set at formatting (0/2k/4k)
2 (number of file register points)
Rough file capacity (unit: byte)
File capacity
(number of files))
Max. 7214/module increased
Max. 6180/module increased
Max. 922/module increased
Max. value of the table below increased
(The values of the table below indicate the increment of each module.)
Ver.1 mode Ver.2 mode
550byte
536byte
550byte
536byte
64 + 20 + (number of target modules
a + 40
564
558
764
Mode setting
Ver.2 additional mode
572byte 624byte
558byte 610byte
566byte 618byte
558byte 610byte
10),
b
(Continued on next page)