Mitsubishi Q00JCPU User Manual page 391

6
FUNCTIONS
Universal
UD
Note6.32
Note33
When checking the transfer status to the program memory with a Universal model QCPU, check
Universal
UD
the version of the CPU module. (
Note6.32
POINT
1. The automatic transfer to the program memory can be set to invalid in the
Options dialog box of GX Developer.
Data is not transferred
to the program memory
automatically by unchecking.
Figure 6.60 Online change/TC setting value change program memory transfer settings screen
2. When the automatic transfer is set to invalid, the following message box
appears after online change is completed.
When "Yes" is selected, data is transferred to the program memory.
When "No" is selected, data is not transferred to the program memory.
3. When "No" is selected in the message box, be sure to execute
Program memory batch transfer by GX Developer.
( GX Developer Operating Manual)
Program transfer status can be checked by the special relay (SM165).
Note6.32
Note33
When the SM165 is ON, the program memory batch transfer has not
completed.
When the SM165 is OFF, the program memory batch transfer has completed.
Appendix 4.5)
6.12 Writing in Program during CPU Module RUN
6.12.3 Precautions for online change
1
2
3
4
5
6
7
8
6
- 91