Mitsubishi Q00JCPU User Manual page 157

3
SEQUENCE PROGRAM CONFIGURATION AND
EXECUTION CONDITIONS
Universal
UD
Note3.32
Note30
Universal
I/O refresh setting is not available for the Universal model QCPU.
UD
Note3.32
Note3.32
(d) I/O refresh setting
The CPU module updates the I/O of the I/O modules and intelligent function
modules by block I/O refresh.(
When I/O refresh setting is performed, the I/O refresh in the specified range can
be made for each set program.
1) I/O refresh setting application
The input (X) used before execution of a fixed scan execution type program
can be imported, and the output (Y) turned ON/OFF in the fixed scan
execution type program can be provided to the outside.
POINT
The scan time of the program being executed (except the fixed scan execution
type program) can be checked in the program list monitor.
( Section 6.13.1)
3.3 Settings for Creation and Execution of Multiple Sequence Programs
3.3.6 Execution type setting and example of type changing
Note30
Section 3.8.1)
Figure 3.53 I/O refresh setting
1
2
3
4
5
6
7
8
3
- 59