Mitsubishi Q00JCPU User Manual page 325

6
FUNCTIONS
(b) Method by GX Developer or external device using MC protocol
(c) Method with link dedicated instructions of the CC-Link IE controller network
RUN/STOP of the CPU module can be executed by performing remote RUN/
STOP operation with GX Developer or external device using MC protocol.
Operate GX Developer by choosing [Online]
Execute remote RUN/STOP from an external device using the MC protocol
command.
Q Corresponding MELSEC Communication Protocol Reference Manual
Remote STOP
command
GX Developer
or
Remote RUN
External device
command
RUN/STOP
status
Figure 6.16 Remote RUN/STOP by GX Developer or external device
module or MELSECNET/H network module
The remote RUN/STOP operation by the link dedicated instructions of the CC-
Link IE controller network module or MELSECNET/H network module can change
the RUN/STOP status of the CPU module. Refer to the following manuals for
details.
CC-Link IE Controller Network Reference Manual
Q Corresponding MELSECNET/H Network System Reference Manual
(PLC to PLC network)
[Remote operation].
Step 0 END
ON
OFF
OFF
STOP
RUN
STOP status
6.6 Remote Operation
6.6.1 Remote RUN/STOP
1
2
Step 0 END
0
ON
3
4
5
6
7
8
6
- 25