Mitsubishi Q00JCPU User Manual page 913

APPENDICES
TableApp.65 SFC control instructions not supported in the Universal model QCPU and alternative methods
Symbol
LD TRn
AND TRn
OR TRn
LDI TRn
ANDI TRn
ORI TRn
Forced transition check
instruction
LD BLm TRn
AND BLm TRn
OR BLm TRn
LDI BLm TRn
ANDI BLm TRn
ORI BLm TRn
SCHG(D) Active step change instruction
SET TRn
SET BLm TRn
Transition control instruction
RST TRn
RST BLm TRn
BRSET(S) Block switching instruction
Appendix 5 Method of replacing High Performance model QCPU with Universal model QCPU
Instruction
When the programmable controller type is changed, these instructions are
converted into SM1255.Modify programs as needed.
Refer to Appendix 3 "Restrictions and alternative method of the Basic model
QCPU and Universal model QCPU" in the "QCPU (Q Mode)/QnACPU
Programming Manual (SFC)".
Refer to Appendix 3 "Restrictions and alternative method of the Basic model
QCPU and Universal model QCPU" in the "QCPU (Q Mode)/QnACPU
Programming Manual (SFC)".
When the programmable controller type is changed, these instructions are
converted into SM1255.Modify programs as needed.
Alternative method
9
10
11
12
App
- 124