Mitsubishi Q00JCPU User Manual page 756

11
CPU MODULE PROCESSING TIME
(8) Low speed program operation time
Basic
Redundant Universal
UD
Note11.7
(9) Common processing time
Q00JCPU
Q00CPU
Q01CPU
Q02CPU
Q02HCPU, Q06HCPU, Q12HCPU, Q25HCPU,
Q02PHCPU, Q06PHCPU, Q12PHCPU,
Q25PHCPU
Q12PRHCPU, Q25PRHCPU
Q02UCPU
Q03UDCPU
Q04UDHCPU, Q06UDHCPU, Q13UDHCPU,
Q26UDHCPU
Q03UDECPU
Q04UDEHCPU, Q06UDEHCPU,
Q13UDEHCPU, Q26UDEHCPU
(10)Multiple CPU high speed transmission processing time
Note7
Basic Redundant
Universal
UD
Note11.7
11
- 17 11.1 Scan Time
11.1.2 Time required for each processing included in scan time
The low speed program operation time is the sum of processing times of the
instructions used in the low speed execution type program to be executed by the CPU
module.
The processing times are the same as those in (4) of this section.
This indicates the processing time common to the CPU modules.
Table11.17 shows the common processing time for each CPU module model.
CPU module
The Multiple CPU high speed transmission processing time is the required time for
Multiple CPU data transmission when the Multiple CPU high speed transmission
function is used.
Refer to the following manual for the Multiple CPU high speed transmission
processing time.
QCPU User's Manual (Multiple CPU System)
Since the Basic model QCPU, Redundant CPU and Universal model QCPU cannot use low
speed execution type programs, it is not necessary to be conscious of the low speed execution
type program operation time.
Note11.7 Note7
Table11.17 Common processing time
Common processing time
0.66ms
0.60ms
0.52ms
0.40ms
0.16ms
0.5ms
0.17ms
0.12ms
0.09ms
0.21ms
0.17ms