Mitsubishi Q00JCPU User Manual page 842

APPENDICES
Number Name Meaning
Device 16 bit modification
SD305 assignment Number of points
(Index register) assigned for Z
SD306 Device
assignment Number of points
(Same as assigned for ZR
SD307
parameter (extension)
contents)
SD308 Number of points
Device
assigned for D
assignment
(internal +
SD309
(Including
extension)
extended data
SD310 Number of points
register (D) and
assigned for W
extended link
(internal +
SD311
register (W))
extension)
Time reserved
Time reserved for
for
SD315 communication
communication
processing
processing
No. of modules
SD340
installed
SD341
SD342
SD343
Ethernet
SD344
information
SD345
to
SD346
SD347
SD348 to Information from
SD354 2nd module
SD355
Information from
to Ethernet
3rd module
SD361 information
SD362
Information from
to
4th module
SD368
*10: The Universal model QCPU except the Q02UCPU.
App
- 53 Appendix 2 Special Register List
TableApp.21 Special register
• Stores the number of points of index register (Z) to be modified in the
range of 16 bits.
(The assignment is set by the ZR device index modification setting
parameter.)
• Stores the number of points set for ZR device (excluding the number of
points set for the extended data register (D) and extended link register
(W)). The number of points is stored in this SD only when 1k or more
points are set for the extended data register (D) and extended link
register (W).
• Stores the total number of points set for the data register (D), which is an
internal user device, and the extended data register (D) (in 32-bit binary
data).
• Stores the total number of points set for the link register (W), which is an
internal user device, and the extended link register (D) (in 32-bit binary
data).
• Reserves the designated time for communication processing with GX
Developer or other units.
• The greater the value is designated, the shorter the response time for
communication with other devices (GX Developer, serial communication
units) becomes.
• If the designated value is out of the range above, it is processed that no
setting is made.
• Setting range: 1 to 100 ms
• Note that the scan time becomes longer by the designated time.
• Indicates the number of mounted Ethernet module.
I/O No. • Indicates I/O No. of mounted Ethernet module
Network
• Indicates network No. of mounted Ethernet module
No.
Group No. • Indicates group No. of mounted Ethernet module
Station
• Indicates station No. of mounted Ethernet module
No.
• Empty
Empty (With QCPU, the Ethernet module IP address of the 1st module is stored
in buffer memory.)
• Empty
Empty (With QCPU, the Ethernet module error code of the 1st module is read
with the ERRRD instruction.)
• Configuration is identical to that for the first module.
• Configuration is identical to that for the first module.
• Configuration is identical to that for the first module.
Explanation
Corres-
ponding
Set by Corresponding
ACPU
(When Set)
D9
S (Initial) New
S (Initial) New
Q00J/Q00/Q01
U New
S (Initial) New
S (Initial) New
CPU
QnU
QnU
Qn(H)
QnPH
QnPRH
Rem
QCPU
Rem
Qn(H)
QnPH
QnPRH
QnU
Rem
Qn(H)
QnPH
QnPRH
*10
QnU
Rem