Mitsubishi Q00JCPU User Manual page 921

APPENDICES
2) Subroutine program
Appendix 5 Method of replacing High Performance model QCPU with Universal model QCPU
• In the subroutine program, the data for outputting ASCII codes using a
fixed scan interrupt program (10ms) are set to work devices. Also, the flag
for activating the processing in the fixed scan interrupt program is turned
ON.
• Specify the following arguments for the subroutine program.
First argument Output string storage address
Second argument Output module start Y number
Figure App.9 Sample program
(Input)
(Input)
Data specified by the CALL(P)
arguments are saved.
Output string storage
address
Number of output strings
Output module start number
Devices used for the string
output processing of the
interrupt program I31 are
initialized.
Yn0 to Yn7 (ASCII code),
Yn8 (strobe signal), and Yn9
(in-execution flag) are all
turned OFF.
The flag to activate the string
output processing of the interrupt
program is turned ON.
App
- 132
9
10
11
12