Mitsubishi Q00JCPU User Manual page 553

7
COMMUNICATION
PORTS OF CPU MODULE
USING
password-unlock
[Function]
Specifies the remote password set in the Built-in Ethernet port QCPU and
performs unlock processing.
* 2 : This command is used only when FTP communication port is specified for a remote password
check target.
[Specification format] quote password-unlock [Remote password]
Remote password:
Specify the remote password set in Built-in Ethernet port QCPU parameter.
• The following is displayed as the execution result upon normal
completion.
200 Command 0key
• The following is displayed when the entered remote password and set
remote password do not match.
556 Password Error
• The following is displayed when another command is requested before
unlock processing of the remote password is performed.
555 Password Locked
[Specification example] When specifying the remote password (1234)
quote password-unlock 1234
[Note]
• The remote password is locked when logged in to the Built-in Ethernet
port QCPU if the FTP communication port is specified for a remote
password check target.
• Performing unlock processing by executing this command before the
various FTP operations enables file operations in the Built-in Ethernet port
QCPU.
• Processing completes normally if the remote password unlock processing
is performed when the FTP communication port is not specified for a
remote password check target.
password-lock
[Function]
Performs lock processing of the remote password set in the Built-in
Ethernet port QCPU.
* 3 : This command is used only when FTP communication port is specified for a remote password
check target.
[Specification format] quote password-lock
The following is displayed as the execution result upon normal completion.
200 Command 0key
[Specification example] When locking the remote password
quote password-lock
BUILT-IN ETHERNET
*2
*3
7.6 File Transfer Function (FTP)
1
2
3
4
5
6
7
8
7
- 39