Mitsubishi Q00JCPU User Manual page 944

APPENDICES
Contents in PLC file setting
"Not used."h is selected.
"Use the same file name as the
program." is selected.
"Use the following file." is
selected.
App
- 155 Appendix 5 Method of replacing High Performance model QCPU with Universal model QCPU
(2) Method of replacing High Performance model QCPU with Universal
model QCPU
(a) When file usability is set for file register, device initial value, and/or
comment
Replacement method depends on the contents on the PLC file setting tab of PLC
parameter.
TableApp.80 Replacement method
No change in parameter setting is required.Operation of the Universal model QCPU is the same
regardless of the file usability setting in the High Performance model QCPU.
When file usability is set to "Not used." in the High Performance model QCPU, delete the
corresponding program file (file register, device initial value or comment), which uses the same name
as the program, from the target memory. The Universal model QCPU executes a program without
using a program file if no program file that uses the same name as the program exists in the target
memory.
High Performance model QCPU
PLC parameter setting
PLC file setting
Use the same file name as the
File register
program.(Target memory: Memory
setting
card (RAM))
Program setting
Program name
File
MAIN
usability
SUB1
setting
SUB2
SRAM card
MAIN SUB1
File
File
register
register
Programs do not use file registers 'SUB1' and 'SUB2'
according to the "File usability setting".
No change in parameter setting is required.Operation of the Universal model QCPU is the same
regardless of the file usability setting in the High Performance model QCPU.
(b) When file usability is set for local device
When the local device to be used is set on the PLC file setting tab of PLC
parameter, all programs use the set local device.
Setting in Universal model QCPU
File register
Use PLC file setting
Not used
Not used
SUB2
File
register
Universal model QCPU
PLC parameter setting
PLC file setting
Use the same file name as the
File register
program.(Target memory: Memory
setting
card (RAM))
SRAM card
MAIN SUB1 SUB2
File
File File
register
register register
File registers 'SUB1' and 'SUB2' shall be deleted so that the
programs 'SUB1' and 'SUB2' do not used them.