Mitsubishi Q00JCPU User Manual page 81

2
PERFORMANCE SPECIFICATION
Item
*7
Step relay [S]
Index register [Z]
Pointer [P]
Interrupt pointer [I]
Special relay [SM]
Special register [SD]
Function input [FX]
Function output [FY]
Function register [FD]
No. of device tracking words
Link direct device
Intelligent function module device
Latch range
RUN/PAUSE contact
Timer function
Allowable instantaneous power failure
period
5VDC internal current consumption
H
External dimensions W
D
Weight
*7 : The step relay is the device for the SFC function.
*8 : The value includes those of the CPU module and base unit.
*9 : The value includes those of the CPU module, base unit, and power supply module.
Remark
Table2.1 Performance Specifications
Q00JCPU
2048 points (S0 to 127/block) (The number of device points is fixed)
10 points (Z0 to 9) (The number of device points is fixed)
300 points (P0 to 299) (The number of device points is fixed)
128 points (I0 to 127) The cyclic interval of system interrupt pointers I28 to 31 can be set up
Default values I28: 100ms, I29: 40ms, I30: 20ms, I31: 10ms
1024 points (SM0 to 1023) (The number of device points is fixed)
1024 points (SD0 to 1023) (The number of device points is fixed)
16 points (FX0 to F) (The number of device points is fixed)
16 points (FY0 to F) (The number of device points is fixed)
5 points (FD0 to 4) (The number of device points is fixed)
Device for accessing the link device directly.
Exclusively used for CC-Link IE controller network and MELSECNET/H.
Specified form: J \X
Device for accessing the buffer memory of the intelligent function module directly.
L0 to 2047 (default) (Latch range can be set up for B, F, V, T, ST, C, D, and W.)
One contact can be set up in X0 to 7FF for each of RUN and PAUSE.
Year, month, date, hour, minute, second and day-of-week
Accuracy: -3.2 to +5.27s(TYP.+1.98s)/d at 0
Accuracy: -2.57 to +5.27s(TYP.+2.22s)/d at 25
Accuracy: -11.68 to +3.65s(TYP.-2.64s)/d at 55
20ms or less
(100VAC or more)
*8
0.26A
98mm (3.86inch)
*9
245mm(9.65inch)
98mm (3.86inch)
*9
0.66kg
Refer to the following manual for the general specifications.
QCPU User's Manual (Hardware Design, Maintenance and Inspection)
Basic model QCPU
Q00CPU
by parameters. (2 to 1000ms, 1ms unit)
----
, J \Y , J \W , J
Specified form: U \G
(Setting by parameters.)
(Setting by parameters.)
(leap year automatically identified)
Varies depending on the power supply module.
0.25A
98mm (3.86inch)
27.4mm (1.08inch)
89.3mm (3.52inch)
2.1 Basic model QCPU
Q01CPU
\B , J \SW , J \SB
0.27A
0.13kg
2
1
2
3
4
5
6
7
8
- 3