Mitsubishi Q00JCPU User Manual page 67

1
OVERVIEW
Universal
UD
Note1.3
Universal
UD
Program
Note1.4
Device
comments
Note3
Note3
The Universal model QCPU cannot boot data from the standard ROM to the program
Universal
UD
memory. (
Note1.3
Universal
The Universal model QCPU cannot make the parameter-valid drive settings with the
UD
DIP switch setting. (
Note1.4
2) High Performance model QCPU, Process CPU, Redundant CPU,
Universal model QCPU
Note1.3
To boot the program data to the program memory, make setting on the
Boot file setting tab of PLC parameter in GX Developer and set the parameter-
valid drive with DIP switches.
Parameter
Device
initial value
Program
memory
Boot
Memory card
Standard
ROM
Figure 1.14 Boot operation of High Performance model QCPU, Process CPU,
Redundant CPU, Universal model QCPU
Section 5.2.3
)
Section 5.2.11
Note1.4
( Section 5.2.9)
Execution of program booted from the standard
ROM or memory card to the program memory.
Boot
Program Parameter
Device Device
comments initial value
)
1.2 Program Storage and Operation
1
2
3
4
5
6
7
8
1
- 26