Mitsubishi Q00JCPU User Manual page 802

APPENDICES
Number Name
SFC comment readout
SM735 instruction in
execution flag
PKEY instruction
SM736 execution in progress
flag
Keyboard input
SM737 reception flag for
PKEY instruction
MSG instruction
SM738
reception flag
PID bumpless
processing
SM774
(for complete
derivative)
Selection of refresh
processing during
SM775
COM instruction
execution
Enable/disable local
SM776
device at CALL
Enable/disable local
SM777 device in interrupt
program
CC-Link dedicated
SM780
instruction executable
PID bumpless
SM794 processing(for
incomplete derivative)
*1: The module whose first 5 digits of serial No. is "06082" or later.
*2: The module whose first 5 digits of serial No. is "07012" or later.
*3: The module whose first 5 digits of serial No. is "07032" or later.
*4: This applies to the CPU module of function version B or later.
*5: The module whose first 5 digits of serial No. is "04012" or later.
*6: The module whose first 5 digits of serial No. is "05032" or later.
App
- 13 Appendix 1 Special Relay List
TableApp.8 Special relay
Meaning
OFF : SFC comment readout
instruction is • Turns on the instructions, (S(P).SFCSCOMR) to
inactivated. read the SFC step comments and (S(P).
ON : SFC comment readout SFCTCOMR) to read the SFC transition condition
instruction is comments.
activating.
OFF : Instruction not • ON when PKEY instruction is being executed.
executed Goes OFF when CR is input, or when input character
ON : Instruction execution string reaches 32 characters.
OFF : Keyboard input
• Goes ON when keyboard input is being conducted.
reception enabled
Goes when keyboard input has been stored at the
ON : Keyboard input
CPU.
reception disabled
OFF : Instruction not
executed • Goes ON when MSG instruction is executed
ON : Instruction execution
OFF : Matched • Specifies whether to match the set value (SV) with
ON : Not matched the process value (PV) or not in the manual mode.
• Select whether link refresh processing will be
OFF : Performs link refresh
performed or not when only communication with the
ON : Performs no link
CPU module is made at the execution of the COM
refresh
instruction.
OFF : Performs all refresh
• Select whether to perform all refreshes or the refresh
processes
processing set by SD778 when the COM instruction
ON : Performs refresh set
is executed.
by SD778
• Set whether the local device of the subroutine
OFF : Local device disabled
program called at execution of the CALL instruction
ON : Local device enabled
is valid or invalid.
OFF : Local device disabled • Set whether the local device at execution of the
ON : Local device enabled interrupt program is valid or invalid.
OFF : CC-Link dedicated
• Switches ON when the number of the CC-Link
instruction executable
dedicated instructions that can be executed
ON : CC-Link dedicated
simultaneously reaches 32. Switches OFF when the
instruction not
number goes below 32.
executable
OFF : Matched • Specifies whether to match the set value (SV) with
ON : Not matched the process value (PV) or not in the manual mode.
Explanation
Corres-
ponding
Set by Corresponding
ACPU
(When Set)
M9
S (status change) New
S (Instruction
New
execution)
S (Instruction
New
execution)
S (Instruction
New
execution)
Q00J/Q00/Q01
U New
U New
Q00J/Q00/Q01
U New
U New
U New
U New
Q00J/Q00/Q01
U New
CPU
*2
Qn(H)
*3
QnPH
*3
QnPRH
QnA
Qn(H)
QnPRH
QnA
QnA
*4
Qn(H)
QnPRH
QnU
QnA
Q00J/Q00/Q01
Qn(H)
QnPH
*4
*5
Qn(H)
*3
QnPH
QnPRH
QnU
QnA
Qn(H)
QnPH
QnPRH
QnU
QnA
*4
*6
Qn(H)
QnPRH
QnU