Mitsubishi Q00JCPU User Manual page 606

9
PARAMETERS
Item Parameter No.
Open settings
FTP settings
Time settings
Enable online change
(FTP, MC protocol)
1016
Disable direct
connection to
MELSOFT
Do not respond to
search for CPU (Built-in
Ethernet port) on
network
9
- 32 9.1 PLC Parameters
9.1.2 High Performance model QCPU, Process CPU, Redundant CPU, Universal model QCPU
Table9.25 Built-in Ethernet por setting list (Continued)
Description
Set items when the MC protocol
communication function is used.
Set items when the File transfer
function (FTP) is used.
Set items when the Time setting
function is used.
Specify whether to enable online
change (writing device data or files
while the CPU is in the RUN
status) in the communication using
the MC protocol or the FTP
H
function.
Specify whether to disable
MELSOFT direction connection.
Disable direct connection to
emphasize the security by setting a
remote password.
Disable CPU modules connected
to MELSOFT devices for
responding the Find CPU function.
Disable the response to emphasize
the security.
Setting range
---
---
---
Checked/Unchecked (Enabled/
Disabled)
Checked/Unchecked (Disabled/
Enabled)
Checked/Unchecked (Disabled/
Enabled)
Default value Reference
Section 7.2
No settings
Section 7.4
No settings Section 7.6
No settings Section 7.5
Section 7.4
Unchecked (Disabled)
Section 7.6
Unchecked (Enabled) ---
Unchecked (Enabled) ---