Mitsubishi Q00JCPU User Manual page 801

APPENDICES
(7) Instruction-Related Special Relays
Number Name
OFF : Carry OFF
SM700 Carry flag
ON : Carry ON
Switching the number of
Number of output
SM701 output characters and the
characters selection
output pattern
OFF : Search next
SM702 Search method
ON : 2-part search
OFF : Ascending order
SM703 Sort order
ON : Descending order
OFF : Non-match found
SM704 Block comparison
ON : All match
Selection of real
OFF : Speed oriented
SM707 number instruction
ON : Accuracy oriented
processing type
CHK instruction OFF : Conditions priority
SM710
priority ranking flag ON : Pattern priority
OFF : Other than during
Divided transmission
SM711
status ON : During divided
Transmission OFF : Batch processing
SM712
processing selection ON : Divided processing
OFF : Communication
Communication
SM714 request registration
ON : Communication
area BUSY signal
OFF : During DI
SM715 EI flag
ON : During EI
OFF : Comment read not
Comment read
SM720
completion flag ON : Comment read
OFF : File not accessed
SM721 File being accessed
ON : File being accessed
OFF : Error detection
BIN/DBIN instruction
SM722
error disabling flag ON : Error detection not
OFF : Request for
BUSY signal for CC-
Link communication
SM730
request registration ON : Request for
area
OFF : Not executed by
XCALL instruction
SM734 execution condition
designation ON : Executed by execution
*1: The module whose first 5 digits of serial No. is "06082" or later.
*2: The module whose first 5 digits of serial No. is "09072" or later.
TableApp.8 Special relay
Meaning
• Carry flag used in application instruction
• Used for the PR, PRC, BINDA, DBINDA, BINHA,
DBINHA, BCDDA, DBCDDA, or COMRD instruction
• Designates method to be used by search instruction.
• Data must be arranged for 2-part search.
• The sort instruction is used to designate whether
data should be sorted in ascending order or in
descending order.
• Goes ON when all data conditions have been met for
the BKCMP instruction.
• When SM707 is OFF, real number instructions are
processed at high speed.
• When it is ON, real number instructions are
processed with high accuracy.
• Remains as originally set when OFF.
• CHK priorities updated when ON.
• In processing of AD57(S1), goes ON when screen is
divided processing
split for transfer, and goes OFF when split
processing is completed
processing
• In processing of AD57(S1), goes ON when canvas
screen is divided for transfer.
request to remote
terminal module
• Used to determine whether communications
enabled
requests to remote terminal modules connected to
the AJ71PT32-S3 can be executed or not.
request to remote
terminal module
disabled
• ON when EI instruction is being executed.
• Turns on only during one scan when the processing
of the COMRD or PRC instruction is completed.
completed
• Turns on only during one scan when the processing
completed
of the COMRD instruction is completed.
• Switches ON while a file is being accessed by the S.
FWRITE, S. FREAD, COMRD, PRC, or LEDC
instruction.
• Switches ON while a file is being accessed by the S.
FWRITE, S. FREAD, COMRD or LEDC instruction.
• Switches ON while a file is being accessed by the S.
FWRITE, S. FREAD, COMRD or SP.DEVST
instruction.
• Turns ON while the ATA card or standard ROM is
being accessed.
performed • Turned ON when "OPERATION ERROR" is
suppressed for BIN or DBIN instruction.
performed
communication with
intelligent device
• Used for determination whether to enable or disable
station enabled
the communication request for the intelligent device
station connected with CC-Link module.
communication with
intelligent device
station disabled
• During OFF, XCALL instructions will not be executed
execution condition
even if execution condition is risen.
risen
• During ON, XCALL instructions will be executed
when execution condition is risen.
condition risen
Explanation
(When Set)
S (Instruction
execution)
S (Instruction
execution)
S (Instruction
execution)
S (Instruction
execution)
S (Instruction
execution)
S (Instruction
execution)
S (Instruction
execution)
S (Status change)
S (Status change)
S (Instruction
execution)
Appendix 1 Special Relay List
Corres-
Set by ponding Corresponding
ACPU CPU
M9
M9012
QnA
Qn(H)
U M9049 QnPH
QnPRH
QnU
U New
U New
New
U New Q4AR
QnA
Qn(H)
New
QnPH
QnPRH
M9065
M9066
QnA
M9081
New
Qn(H)
QnPH
New
QnPRH
QnU
Qn(H)
QnPH
Qn(H)
QnPH
QnPRH
New
QnU
*2
QnU
U New QCPU
New QnA
U New
Qn(H)
App
9
10
11
12
*1
- 12