Mitsubishi Q00JCPU User Manual page 591

9
PARAMETERS
(3) PLC file
Item Parameter No.
File register 1100
Comment file used in a
1101
command
Initial Device value 1102
File for local device 1103
Transfer data to the
standard ROM at the
1104
time of latch data backup
*1
operation
File used for the
SP.DEVST/S.DEVLD
1105
*1
instruction
9.1.2 High Performance model QCPU, Process CPU, Redundant CPU, Universal model QCPU
Set various files used by the CPU module.
Table9.14 PLC file list
Description
Set the file register file used by
H
the program.
Set the device comment file
H
used by the program.
Set the device initial value file
H
used by the CPU module.
Set the local device file used by
H
the program.
Set whether to file register batch
transfer or not at the time of latch
H
data backup to the standard
ROM.
Set the file for storing device
data used for writing/reading the
H
device data to/from the standard
ROM.
* 1 : Can be set only when the Universal model QCPU is used.
Figure 9.14 PLC file
Setting range
• Not used
• Use the same file name as
Not used
the program
• Use the following file
• Not used
• Use the same file name as
Not used
the program
• Use the following file
• Not used
• Use the same file name as
Not used
the program
• Use the following file
• Not used
Not used
• Use the following file
Whether to perform batch
Not used
transfer of the file register or not
• Not used
Not used
• Use the following file.
9.1 PLC Parameters
Default value Reference
Section 10.7
----
Section 6.26
Section 10.14.1
Section 6.29
Section 6.30
9
- 17
9
10
11
12