Mitsubishi Q00JCPU User Manual page 736

10
DEVICE EXPLANATION
PLC file setting
Set
Not set
10
- 121 10.14 Convenient Usage of Devices
10.14.2 Local devices
(b) Precautions
1) Changing local device
For programs set to "Not used" for local device, do not change or refer to the
local device.
When the local device is changed by a program that does not use local device,
the changed value will not be held.
2) Creation condition of local device file
Creation of a local device file depends on the PLC parameter setting.
Table 9.26 shows the creation condition of local device file.
Table10.29 Creation condition of local device file
PLC parameter setting
*1
File usability setting
Device setting
Use PLC file setting
Set
Not used
Use PLC file setting
Not set
Not used
Use PLC file setting
Set
Not used
Use PLC file setting
Not set
Not used
* 1 : It indicates the range setting for local devices in the device setting.
File creation Error detection
• Universal model QCPU only:
PARAMETER ERROR (Error code:
3000)
• Other than Universal model QCPU:
FILE SET ERROR (Error code:
2400)
: Create a file ,
----
----
----
----
----
----
----
: Do not create a file