Mitsubishi Q00JCPU User Manual page 83

2
PERFORMANCE SPECIFICATION
Item
Program memory
Memory card (RAM)
Memory
Max. number of
card (ROM)
files stored
Standard RAM
Standard ROM
No. of times of writing data into the standard
ROM
No. of I/O device points
(No. of points usable on program)
No. of I/O points (No. of points accessible to
the actual I/O module)
Internal relay [M]
Latch relay [L]
Link relay [B]
Timer [T]
Retentive timer [ST]
Counter [C]
Data register [D]
Link register [W]
Annunciator [F]
Edge relay [V]
*5 : Extended by the upgraded functions of CPU module (
*6 : The CPU module can execute up to 124 programs. The CPU module cannot execute 125 or more programs.
*7 : The number of points can be changed within the setting range. (
Table2.2 Performance Specifications
Q02CPU
28
Flash card
ATA card
28
2048 points by default (T0 to 2047) (sharing of low- and high-speed timers) (changeable)
The low- and high-speed timers are specified by the instructions.
The measurement unit of the low- and high-speed timers is set up by parameters.
(Low-speed timer: 1 to 1000ms, 1ms unit, 100ms by default)
(High-speed timer: 0.1 to 100ms, 0.1ms unit, 10ms by default)
0 point by default (sharing of the low- and high-speed retentive timers) (changeable)
The low- and high-speed retentive timers are specified by the instructions.
The measurement unit of the low- and high-speed retentive timers is set up by parameters.
(Low-speed retentive timer: 1 to 1000ms, 1ms unit, 100ms by default)
(High-speed retentive timer: 0.1 to 100ms, 0.1ms unit, 10ms by default)
High performance model QCPU
Q02HCPU Q06HCPU
60
287 (When the Q2MEM-2MBS is used)
288
512
*5
3
60
Max. 100000 times
8192 points (X/Y0 to 1FFF)
4096 points (X/Y0 to FFF)
8192 points by default (M0-8191) (changeable)
8192 points by default (L0 to 8191) (changeable)
8192 points by default (B0 to 1FFF) (changeable)
• Normal counter, 1024 points by default
(C0 to 1023) (changeable)
• Interrupt counter: 256 points max.
(0 point by default, setting by parameters)
12288 points by default (D0 to 12287) (changeable)
8192 points by default (W0 to 1FFF) (changeable)
2048 points by default (F0 to 2047) (changeable)
2048 points by default (V0 to 2047) (changeable)
Appendix 4.2)
Section 10.2)
2.2 High performance model QCPU
Q12HCPU Q25HCPU
*6
124
252
124 252
2
- 5
1
2
3
4
5
6
7
8