Mitsubishi Q00JCPU User Manual page 604

9
PARAMETERS
Item
Online module change (hot
swapping) setting *2
All CPUs can read all
inputs
I/O sharing
when using
Multiple
CPUs
All CPUs can read all
outputs
CPU specific send
Multiple
range *1
CPU high
speed
communica
Auto
tion area
Auto
refresh
setting
refresh
device
setting *1
setting *1
Communication area setting (refresh
setting)
Refresh parameter detailed device
specification *1
9
- 30 9.1 PLC Parameters
9.1.2 High Performance model QCPU, Process CPU, Redundant CPU, Universal model QCPU
Table9.24 Multiple CPU setting list (Continued)
Parameter
Description
No.
Set whether online module
change (hot swapping) is
enabled or disabled in the
E006 multiple CPU system. (When
H
enable is selected, the non-
group I/O status cannot be
imported.
Set whether the input status of
the input module or intelligent
function module controlled by
the other CPU will be imported
or not.
0E04
H
Set whether the output status of
the output module controlled by
the other CPU will be imported
or not.
Set the multiple CPU high-speed
transmission area size assigned
E008 for each CPU module
H
configuring the multiple CPU
system.
Set a range for data
communication performed with
E009
H
the auto refresh function in the
E00A
H
user area of multiple CPU high-
speed transmission area.
Set the device and its number of
points to/from which data will be
E002
H
written/read by auto refresh
E003
H
between the CPU modules of the
multiple CPU system.
Specify the transfer destination
device and the number of
transfer points for transferring
the data in the multiple CPU
E007 shared memory to the device in
H
the CPU module when the start
device is set in the CPU module.
Specification is available for
each CPU module respectively.
* 1 : Settable only when the Universal model QCPU (except Q02UCPU) is used.
* 2 : Not settable in the Q02UCPU.
* 3 : SM, SD, SB and SW are usable only when they are selected as a send device.
Setting range
• High Performance
Enable/Disable online module
• Process CPU:
change (hot swapping) of
other CPU modules.
• Universal model
Do not import non-group input
Do not import non-
status/Import non-group input
group input status
status
Do not import non-group
Do not import non-
output status/Import non-
group output status
group output status
• For simple setting: 0 to 12k
points (1k units)
3k points
• For high-speed setting: 0 to
16k points (0.5k units)
Available devices*3: X, Y, M,
L, B, D, W, R, ZR, SM, SD,
SB, SW
[Set the head device to each
CPU]
Do not set the head
Do not set the head device to
device to each CPU
each CPU/set the head
device to each CPU
[Transmission range of each
CPU module]
0 to 2048 points (2 point
No setting
units)/module
Max. 4k points (4096 points)/
system
Available devices: D, W, R,
No setting
ZR, B, M, Y
Default value Reference
model QCPU:
Disable
Enable
QCPU:
Disable
QCPU User's
Manual
(Multiple CPU
----
System)