Mitsubishi Q00JCPU User Manual page 261

5
MEMORIES AND FILES USED IN CPU MODULE
(4) Write to memory card
The following explains the pre-write operation and the types of wriring methods.
(a) Write to SRAM or ATA card
(b) Write to Flash card
POINT
Remark
5.2 High Performance Model QCPU, Process CPU, Redundant CPU, Universal Model QCPU
To write data to the SRAM or ATA card, choose [Online]
Developer.
When writing data to the SRAM card, select "Memory card (RAM)" as the target
memory on the Write to PLC screen.
When writing data to the ATA card, select "Memory card (ROM)" as the target
memory on the Write to PLC screen.
To write data to the Flash card, there are the following two methods.
• Choose [Online] [Write to PLC (Flash ROM)]
memory to ROM...] on GX Developer to batch-write the program memory
data to the Flash card. (
• Choose [Online] [Write to PLC (Flash ROM)]
ROM)] on GX Developer to write data to the Flash card. (
The file size has the minimum unit. (
The occupied memory capacity may be greater than the actual file size.
Note that as the number of files rises, the difference between the occupied
memory capacity and actual file size increases.
Refer to Section 5.2.7 for details of the selection, applications, procedures and
precautions for Flash card writing methods.
Figure 5.26 Write to PLC screen
Section 5.2.7)
Section 5.4.4)
5.2.6 Memory card
[Write to PLC] on GX
[Write the program
[Write to PLC (Flash
Section 5.2.7)
5
- 37
1
2
3
4
5
6
7
8