Mitsubishi Q00JCPU User Manual page 598

9
PARAMETERS
(8) Boot file
Universal
UD
Note9.2
Note1
Item Parameter No.
Clear
program
memory
Auto
Download
Boot option
all Data
from
Memory 7000
card to
Standard
ROM
Boot file setting
Note1
Universal
UD
Note9.2
9
- 24 9.1 PLC Parameters
9.1.2 High Performance model QCPU, Process CPU, Redundant CPU, Universal model QCPU
Make the settings to execute boot run and automatic write to standard ROM
Table9.20 Boot file setting list
Description
Set whether the program
memory will be cleared or not at
boot.
Set whether the memory card
data will be automatically written
to the standard ROM or not at a
H
boot.
Set the type, data name and
transfer source drive of the boot-
run file.
Automatic write to standard ROM is not available for the Universal model QCPU.
Figure 9.19 Boot file
Setting range
Do not clear/Clear program
memory at boot
Do not perform/Perform
automatic all data write from
memory card to standard ROM
Type, data name, transfer source
drive (transfer source drive is
automatically set by the program
memory)
Note9.2
Default value Reference
Do not clear
program memory at
boot
Do not perform
automatic all data
write from memory Section 5.2.8
card to standard Section 5.2.9
ROM
No setting
.