Mitsubishi Q00JCPU User Manual page 595

9
PARAMETERS
(6) Device
Item Parameter No.
1
2000
Device points*
H
4
2001
Latch (1) start/end*
H
4
2002
Latch (2) start/end*
H
Local device start/end 2003
H
9.1.2 High Performance model QCPU, Process CPU, Redundant CPU, Universal model QCPU
Set the number of used points, latch range and local device range for each device.
Table9.17 Device list
Description
Set the number of used device
points according to the system.
Set the latch range (first device
number/last device number) in
which clear is enabled by the
*2
RESET/L.CLR switch or
remote latch clear operation.
Set the latch range (first device
number/last device number) in
which clear is disabled by the
*2
RESET/L.CLR switch or
remote latch clear operation.
Set the device range (first device
number/last device number)
used as a local device.
Figure 9.17 Device
Setting range
X (8k points), Y (8k points), S (8k X:8k points,Y:8k points
5 3 M:8k points,
points)* , SB (2k points)* and
3 L:8k points*
SW (2k points)* are fixed.
B:8k points, F:2k points
Can be set within the range of
SB:2k points, V:2k points
total 29k words, including the
above number of points (3.7k S:8k points*
words). ST:0k points, C:1k points
1 device: Max. 32k points D:12k points, W:8k points
Total of bit devices: 64k points SW:2k points
Set only one range to each of the
B, F, V, T, ST, C, D and W No setting
devices.
Set only one range to each of the
L, B, F, V, T, ST, C, D and W No setting
devices.
Set only one range to each of the
No setting
M, V, T, ST, C and D devices.
9.1 PLC Parameters
Default value Reference
4
Section 10.1
Section 10.2
5
, T:2k points
Section 3.7
Section 6.3
Section 3.7
Section 6.3
Section 10.14.1
9
- 21
9
10
11
12