Table of Contents
Advertisement
Paper and Other Media
2
Load and align the edge of the paper against the left edge of the tray, with the side to be
copied or printed on facing up.
Note
2
3
Push the tray in gently until it stops.
Important
Loading Paper in Tray 5 (Bypass)
When printing or copying on a size or type of paper that cannot be set in Trays 1 to 4, use
Tray 5. The following describes the procedures to load paper in Tray 5. For printings, specify
the instructions using the [Paper/Output] tab in the print driver. Also specify the type of
paper to be loaded.
1
Open the Tray 5 (Bypass).
Note
60
Do not load paper above the maximum fill line ("MAX" in the right figure). It may cause paper jams or
machine malfunction.
Do not place any paper or objects in the empty space on the right side of Trays 1 to 4. It may cause paper
jams or machine malfunction.
When inserting the tray, push it gently. Forcibly pushing in the tray may cause machine malfunction.
If necessary, pull out the extension tray. The extension tray can be extended in two stages. Pull out the
extension tray gently.
Advertisement
Table of Contents
