Pluggable Transceivers Supported On Ex4300 Switches - Juniper EX4300 Series Hardware Manual

Calculate the Fiber-Optic Cable Power Budget for EX Series Devices | 148
Calculating the Fiber-Optic Cable Power Margin for EX Series Devices | 149

Pluggable Transceivers Supported on EX4300 Switches

You can find the list of transceivers supported on EX4300 switches except EX4300-48MP and
EX4300-48MP-S switches and information about those transceivers at the
page for EX4300.
You can find the list of transceivers supported on EX4300-48MP and EX4300-48MP-S switches and
information about those transceivers at the
NOTE: We recommend that you use only optical transceivers and optical connectors purchased
from Juniper Networks with your Juniper Networks device.
CAUTION: The Juniper Networks Technical Assistance Center (JTAC) provides
complete support for Juniper-supplied optical modules and cables. However, JTAC does
not provide support for third-party optical modules and cables that are not qualified or
supplied by Juniper Networks. If you face a problem running a Juniper device that uses
third-party optical modules or cables, JTAC may help you diagnose host-related issues if
the observed issue is not, in the opinion of JTAC, related to the use of the third-party
optical modules or cables. Your JTAC engineer will likely request that you check the
third-party optical module or cable and, if required, replace it with an equivalent
Juniper-qualified component.
Use of third-party optical modules with high-power consumption (for example,
coherent ZR or ZR+) can potentially cause thermal damage to or reduce the lifespan of
the host equipment. Any damage to the host equipment due to the use of third-party
optical modules or cables is the users' responsibility. Juniper Networks will accept no
liability for any damage caused due to such use.
The Gigabit Ethernet transceivers installed in EX4300 switches support digital optical monitoring
(DOM): You can view the diagnostic details for these transceivers by issuing the operational mode CLI
command
show interfaces diagnostics optics
Hardware Compatibility Tool page for EX4300
.
Hardware Compatibility Tool
Multigigabit.
141