Interface Alarm Messages - Juniper QFX5200 Hardware Manual

Hide thumbs Also See for QFX5200:
Table of Contents

Advertisement

QFX5200 Switch Hardware Guide
Table 31: Alarm Terms and Definitions (continued)
Term
Definition
Alarm types
Alarms include the following types:
Chassis alarm—Predefined alarm triggered by a physical condition on the device such as a power supply
failure or excessive component temperature.
Interface alarm—Alarm you configure to alert you when an interface link is down. Applies to
fibre-channel
alarm for the link-down condition, or have the condition ignored.
System alarm—Predefined alarm that might be triggered by a missing rescue configuration, failure to
install a license for a licensed software feature, or high disk usage.
Related
Documentation

Interface Alarm Messages

120
, and
management-ethernet
Chassis Alarm Messages on a QFX3008-I Interconnect Device
Chassis Alarm Messages on a QFX3500 Device
Interface Alarm Messages on page 120
show chassis alarms
show system alarms
Interface alarms are alarms that you configure to alert you when an interface is down.
To configure an interface link-down condition to trigger a red or yellow alarm, or to
configure the link-down condition to be ignored, use the
chassis
] hierarchy level. You can specify the
interface type.
management-ethernet
NOTE:
Fibre Channel alarms are only valid on QFX3500 devices.
NOTE:
When red alarms or major alarms are issued on QFX5100 and EX4600
switches, the alarm LED glows amber instead of red.
By default, major alarms are configured for interface link-down conditions on the control
plane and management network interfaces in a QFabric system. The link-down alarms
indicate that connectivity to the control plane network is down. You can configure these
alarms to be ignored using the
NOTE:
If you configure a yellow alarm on the QFX3008-I Interconnect device,
it will be handled as a red alarm.
interfaces. You can configure a red (major) or yellow (minor)
alarm
ethernet
,
fibre-channel
statement at the [
alarm
edit chassis
Copyright © 2017, Juniper Networks, Inc.
,
ethernet
statement at the [
edit
, or
] hierarchy level.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the QFX5200 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Table of Contents