Ip Proxy-Arp - Cisco 300 Series Cli Manual

22
IP Addressing Commands
Parameters
N/A
Default
Enabled by default.
Command Mode
Global Configuration mode
User Guidelines
This command overrides any proxy ARP interface configuration.
The command is supported only in the router mode.
Example
The following example globally disables ARP proxy.
switchxxxxxx(config)# ip arp proxy disable

22.9 ip proxy-arp

Use the ip proxy-arp Interface Configuration mode command to enable an ARP
proxy on specific interfaces. Use the no form of this command disable it.
Syntax
ip proxy-arp
no ip proxy-arp
Default Configuration
ARP Proxy is disabled.
Command Mode
Interface Configuration mode
459 OL-32830-01 Command Line Interface Reference Guide