Show Dot1X Locked Clients - Cisco 300 Series Cli Manual

802. 1 X Commands
OL-32830-01 Command Line Interface Reference Guide
•
Server timeout—Number of seconds that the device waits for a response
from the authentication server before resending the request.
•
Session Time—Amount of time (HH:MM:SS) that the user is logged in.
•
MAC address—Supplicant MAC address.
•
Authentication success—Number of times the state machine received a
Success message from the Authentication Server.
•
Authentication fails—Number of times the state machine received a Failure
message from the Authentication Server.

2.32 show dot1x locked clients

Use the show dot1x locked clients Privileged EXEC mode command to display all
clients who are locked and in the quiet period.
Syntax
show dot1x locked clients
Parameters
N/A
Command Mode
Privileged EXEC mode
User Guidelines
Use the show dot1x locked clients command to display all locked (in the quiet
period) clients.
Examples
The following example displays locked clients:
Example 1
switchxxxxxx# show dot1x locked clients
2
82