Authentication Open - Cisco 300 Series Cli Manual

802. 1 X Commands
OL-32830-01 Command Line Interface Reference Guide
Command Mode
Global Configuration mode
User Guidelines
You can select either authentication by a RADIUS server, no authentication (none),
or both methods.
If you require that authentication succeeds even if no RADIUS server response
was received, specify none as the final method in the command line.
Example
The following example sets the 802.1X authentication mode to RADIUS server
authentication. Even if no response was received, authentication succeeds.
switchxxxxxx(config)#
2.2

authentication open

To enable open access (monitoring mode) on this port, use the authentication
open command in interface configuration mode. To disable open access on this
port, use the no form of this command.
Syntax
authentication open
no authentication open
Parameters
This command has no arguments or keywords.
Default Configuration
Disabled.
Command Mode
Interface (Ethernet) Configuration mode
aaa authentication dot1x default radius none
2
46