Policy-Map - Cisco 300 Series Cli Manual

Quality of Service (QoS) Commands
OL-32830-01 Command Line Interface Reference Guide
Command Mode
Class-map Configuration mode.
Example
The following example defines a class map called Class1. Class1 contains an ACL
called enterprise. Only traffic matching all criteria in enterprise belong to the class
map.
switchxxxxxx(config)#
switchxxxxxx(config-cmap)#

39.7 policy-map

Use the policy-map Global Configuration mode command to creates a policy map
and enter the Policy-map Configuration mode. Use the no form of this command to
delete a policy map.
Syntax
policy-map-name
policy-map
policy-map-name
no policy-map
Parameters
policy-map-name—Specifies the policy map name.
Default Configuration
N/A
Command Mode
Global Configuration mode
User Guidelines
This command is only available when QoS is in advanced mode.
Use the policy-map Global Configuration mode command to specify the name of
the policy map to be created, added to, or modified before configuring policies for
classes whose match criteria are defined in a class map.
class-map class1
match access-group
enterprise
39
748