Show Errdisable Interfaces; Storm-Control Broadcast Enable - Cisco 300 Series Cli Manual

Ethernet Configuration Commands
OL-32830-01 Command Line Interface Reference Guide

18.25 show errdisable interfaces

To display the Err-Disable state of all interfaces or of a specific interface, use the
show errdisable interfaces Privileged EXEC mode command.
Syntax
show errdisable interfaces
Parameters
•
interface—(Optional) Port or port-channel number.
Default Configuration
Display for all interfaces.
Command Mode
Privileged EXEC mode
Example
The following example displays the Err-Disable state of gi 1
switchxxxxxx#
show errdisable interfaces
Interface Reason
------------ ------------------
gi11 stp-bpdu-guard

18.26 storm-control broadcast enable

To enable storm control on a port, use the storm-control broadcast enable
Interface Configuration mode command. Use the no form of this command to
disable storm control.
Syntax
storm-control broadcast enable
no storm-control broadcast enable
[interface-id]
18
.
414