Cisco 300 Series Cli Manual page 679

30
679
gi14 0 0 0
The following table describes significant LLDP fields shown in the display:
Field
Port
Device ID
Port ID
System name
Capabilities
System description
Port description
Management
address
Auto-negotiation
support
Auto-negotiation
status
Auto-negotiation
Advertised
Capabilities
Operational MAU
type
LLDP MED
Capabilities
Link Layer Discovery Protocol (LLDP) Commands
0 0
Description
The port number.
The neighbor device's configured ID (name) or MAC
address.
The neighbor device's port ID.
The neighbor device's administratively assigned
name.
The capabilities discovered on the neighbor device.
Possible values are:
B - Bridge
R - Router
W - WLAN Access Point
T - Telephone
D - DOCSIS cable device
H - Host
r - Repeater
O - Other
The neighbor device's system description.
The neighbor device's port description.
The neighbor device's management address.
The auto-negotiation support status on the port.
(Supported or Not Supported)
The active status of auto-negotiation on the port.
(Enabled or Disabled)
The port speed/duplex/flow-control capabilities
advertised by the auto-negotiation.
The port MAU type.
The sender's LLDP-MED capabilities.
OL-32830-01 Command Line Interface Reference Guide
0 0