Qos Trust (Global) - Cisco 300 Series Cli Manual

Quality of Service (QoS) Commands
OL-32830-01 Command Line Interface Reference Guide
Parameters
•
dscp-list—Specifies up to 8 DSCP values, separated by spaces. (Range: 0–
63)
•
queue-id—Specifies the queue number to which the DSCP values are
mapped.
Default Configuration
The default map for 4 queues is as follows.
DSCP value
Queue-ID
The default map for 8 queues is as follows.
DSCP 0 1-8
value
Queue-I 2 1
D
Command Mode
Global Configuration mode
Example
The following example maps DSCP values 33, 40 and 41 to queue 1.
switchxxxxxx(config)# qos map dscp-queue

39.29 qos trust (Global)

Use the qos trust Global Configuration mode command to configure the system to
the basic mode and trust state. Use the no form of this command to return to the
default configuration.
Syntax
qos trust {cos | dscp}
0-15 16-23
1 2
9-15 16,24,
40,48-
63
3 7
24-39,48-63 40-47
3 4
17-23 25-31 33-39
4 5 6
33 40 41 1
to
39
32,41-
47
8
776