Show Sessions - Cisco 300 Series Cli Manual

50
System Management Commands
Syntax
show reload
Parameters
This command has no arguments or keywords.
Default Usage
None
Command Mode
Privileged EXEC mode
User Guidelines
You can use this command to display a pending software reload. To cancel a
pending reload, use this command with the cancel parameter.
Example
The following example displays that reboot is scheduled for 00:00 on Saturday,
April-20.
switchxxxxxx> show reload
Reload scheduled for 00:00:00 UTC Sat April 20 (in 3 hours and 12 minutes)

50.13 show sessions

To display open Telnet sessions, use the show sessions EXEC mode command.
Syntax
show sessions
Parameters
This command has no arguments or keywords.
Default Usage
None
983 OL-32830-01 Command Line Interface Reference Guide